Eutron SmartKey 3 USB

Post Reply
John Kamp
Junior Member
Posts: 3
Joined: Mon May 19, 2014 10:09 am

Eutron SmartKey 3 USB

Post by John Kamp » Mon May 19, 2014 10:24 am

hello everyone, I'm here to ask you a valuable opinion,
I would like to emulate a Eutronsec smartkey 3, I've already got the dmp file and sys, but when I try to launch the installer hangs with devctrl is the following:

Start driver eutron
Opened service
Error: Can not start driver - error 1275
press any key to continue.

I do not know how to go on, please help me.
Sorry for my bad English, I thank you in advance.

User avatar
ACalcutt
Vistumbler / TechIdiots Admin
Vistumbler / TechIdiots Admin
Posts: 1210
Joined: Sun Oct 21, 2007 6:50 pm
Location: Rutland, MA
Contact:

Re: Eutron SmartKey 3 USB

Post by ACalcutt » Mon May 19, 2014 12:42 pm

I have two ideas of what may cause your error

1.) Driver signing enforcement. If this is enabled you may have issues with the drivers needed. the quick way to check this would be to hit F8 while booting (like you would if you were going into save mode), then choose the option to disable driver signing enforcement. If that fixes it you know this is your problem

in my emulation instructions here ( http://www.techidiots.net/notes/emulate ... asp-hl-pro ) I noted "For x64 windows run 'HaspHL_Tools.zip\Multikey\MultiKey64\install.cmd' (note that you will either need to disable driver signing enforcement or sign the MultiKey.sys file with something like 'Driver Signature Enforcement Overrider' in a x64 OS vista and above"

2.) maybe an issue with the version driver you are using

John Kamp
Junior Member
Posts: 3
Joined: Mon May 19, 2014 10:09 am

Re: Eutron SmartKey 3 USB

Post by John Kamp » Tue May 20, 2014 2:38 am

Thanks for the reply ACalcutt,
I forgot to say that they are already in test mode, use dseo13, I've already signed 64-bit drivers for multikey.sys, so much so that now the device in Device Manager Virtual Usb Multikey appears without error.
I tried using your guide with your software, but Toro Aladdin does not find anything, From there, I could not be extracted as these passwords.
I think I'm already at a good level, so I will not give up, with your help I think to succeed.

User avatar
ACalcutt
Vistumbler / TechIdiots Admin
Vistumbler / TechIdiots Admin
Posts: 1210
Joined: Sun Oct 21, 2007 6:50 pm
Location: Rutland, MA
Contact:

Re: Eutron SmartKey 3 USB

Post by ACalcutt » Tue May 20, 2014 8:49 am

Did you run Toro Aladdin on a 32bit machine. I was unable to get this program to work on a 64bit machine. I ended up using windows xp 32bit virtual machine just to grab the password.

John Kamp
Junior Member
Posts: 3
Joined: Mon May 19, 2014 10:09 am

Re: Eutron SmartKey 3 USB

Post by John Kamp » Tue May 20, 2014 9:47 am

I did the same test, I installed toro, downloaded from the link in the description, but once I started writing remains the connection.
I tried to open the program that I need to decrypt but in toro nothing is detected.
You have ICQ chat?

User avatar
ACalcutt
Vistumbler / TechIdiots Admin
Vistumbler / TechIdiots Admin
Posts: 1210
Joined: Sun Oct 21, 2007 6:50 pm
Location: Rutland, MA
Contact:

Re: Eutron SmartKey 3 USB

Post by ACalcutt » Tue May 20, 2014 3:29 pm

Did you go into the application that uses the key when you had Aladdin open? For example... in the software I was using the key was required to talk to a sign. It wasn't until I hit connect in my sign software that the key showed up in alladin.

www.cadshop.ru
Junior Member
Posts: 2
Joined: Fri May 29, 2015 9:56 am

Eutron SmartKey 3 USB

Post by www.cadshop.ru » Fri May 29, 2015 10:02 am

Virtual Usb Multikey and toro utility is not intended for Eutron Dongle emulation.
Eutron emulator is different solution, tou have to dump key with correct dumper or make log with usbtrace or hhd monitor utility.
http://cadshop.ru
Dongle backup and emulation service.

kenedy
Newbie
Posts: 1
Joined: Wed Jun 29, 2016 5:25 pm

Eutron SmartKey 3 USB

Post by kenedy » Wed Jun 29, 2016 5:30 pm

I also have the idea of ACalcutt's and I agree with him...Good ideas ACalcutt
Graduated from Soran University with First Class Degree with Honours in Computer Science.

HP3
Junior Member
Posts: 3
Joined: Wed Jun 22, 2016 9:39 pm

Eutron SmartKey 3 USB

Post by HP3 » Wed Jun 29, 2016 5:49 pm

if they need help to emulate "Eutron Smarkey 3" send a message

Post Reply