New Feature - KML Signal Mapping
Posted: Sun Jun 21, 2009 12:34 am
I have added a new feature (v9.5 Beta 3) to map signal strength with google earth (Export --> Export KML Signal Map). This map can be generated for a Single AP, All APs, or Filtered APs.
The height of the line (altitude above the earth) is set to the signal value.
The color of the line is also based on signal.
0% - 16% - Red
17% - 32% - Orange
33% - 48% - Yellow
46% - 64% - Yellow-Green
65% - 80% - Light-Green
80% - 100% - Dark-Green
Vistumbler 9.5 Beta 3 Source (SVN)
http://vistumbler.svn.sourceforge.net/v ... athrev=360
Vistumbler 9.5 Beta 3 Source (tar.gz)
http://vistumbler.svn.sourceforge.net/v ... athrev=360
The height of the line (altitude above the earth) is set to the signal value.
The color of the line is also based on signal.
0% - 16% - Red
17% - 32% - Orange
33% - 48% - Yellow
46% - 64% - Yellow-Green
65% - 80% - Light-Green
80% - 100% - Dark-Green
Vistumbler 9.5 Beta 3 Source (SVN)
http://vistumbler.svn.sourceforge.net/v ... athrev=360
Vistumbler 9.5 Beta 3 Source (tar.gz)
http://vistumbler.svn.sourceforge.net/v ... athrev=360