No Cannel with intel ultimate n wifi link 6300
-
- Junior Member
- Posts: 5
- Joined: Fri Feb 03, 2012 7:56 am
No Cannel with intel ultimate n wifi link 6300
Hello
i have a Problem with Vistumber since i have a intel ultimate n wifi link 6300 vistumbler not shows the Cannel.
And i have start it in Native Mode.
With other Software it shows the Cannel.
Please help me.
Your post looks too spamy for a new user, please remove off-site URLs.
i Want to post a link.
intel.c--o-m--/content/www/us/en/wireless-products/centrino-ultimate-n-6300.html
i have a Problem with Vistumber since i have a intel ultimate n wifi link 6300 vistumbler not shows the Cannel.
And i have start it in Native Mode.
With other Software it shows the Cannel.
Please help me.
Your post looks too spamy for a new user, please remove off-site URLs.
i Want to post a link.
intel.c--o-m--/content/www/us/en/wireless-products/centrino-ultimate-n-6300.html
- ACalcutt
- Vistumbler / TechIdiots Admin
- Posts: 1302
- Joined: Sun Oct 21, 2007 6:50 pm
- Location: Rutland, MA
- Contact:
Re: No Cannel with intel ultimate n wifi link 6300
If you are in native mode you will not see the channel. Channel is only available in netsh mode (native mode unchecked).
-
- Junior Member
- Posts: 5
- Joined: Fri Feb 03, 2012 7:56 am
Re: No Cannel with intel ultimate n wifi link 6300
At the netsh mode i see nothing. The mode not work with the card.
Then i become no Information.
And in the native mode i see all information only the channel stand alwas by 0.
Then i become no Information.
And in the native mode i see all information only the channel stand alwas by 0.
- ACalcutt
- Vistumbler / TechIdiots Admin
- Posts: 1302
- Joined: Sun Oct 21, 2007 6:50 pm
- Location: Rutland, MA
- Contact:
Re: No Cannel with intel ultimate n wifi link 6300
If your version of windows is not en_US you need to select a matching language pack. Have you already done this? (see Settings --> Set Language)
Vistumbler uses what I call "Searchwords" to find the access point information in a netsh dump. If there is a vistumbler language pack for your version of windows it will automatically set the searchwords when you choose the language pack. The are also options to manual set these searchwords if you don't want to use a language pack or one is not available. (see Settings --> Set Netsh Search Words)
Vistumbler uses what I call "Searchwords" to find the access point information in a netsh dump. If there is a vistumbler language pack for your version of windows it will automatically set the searchwords when you choose the language pack. The are also options to manual set these searchwords if you don't want to use a language pack or one is not available. (see Settings --> Set Netsh Search Words)
-
- Junior Member
- Posts: 5
- Joined: Fri Feb 03, 2012 7:56 am
Re: No Cannel with intel ultimate n wifi link 6300
I have install a German language Pack.
But the problem is not resolved.
But the problem is not resolved.
- ACalcutt
- Vistumbler / TechIdiots Admin
- Posts: 1302
- Joined: Sun Oct 21, 2007 6:50 pm
- Location: Rutland, MA
- Contact:
Re: No Cannel with intel ultimate n wifi link 6300
Have you verified the right interface is selected in the interface menu?
-
- Junior Member
- Posts: 5
- Joined: Fri Feb 03, 2012 7:56 am
Re: No Cannel with intel ultimate n wifi link 6300
interface menu ?
You mean that i have in the config the right wlan Card ?
You mean that i have in the config the right wlan Card ?
- ACalcutt
- Vistumbler / TechIdiots Admin
- Posts: 1302
- Joined: Sun Oct 21, 2007 6:50 pm
- Location: Rutland, MA
- Contact:
Re: No Cannel with intel ultimate n wifi link 6300
yes, have you double checked the right interface is selected (it may have changed when you switched from native wifi mode)
This is what i mean my the interfaces menu
This is what i mean my the interfaces menu
-
- Junior Member
- Posts: 5
- Joined: Fri Feb 03, 2012 7:56 am
Re: No Cannel with intel ultimate n wifi link 6300
Thank you very mutch that was the Problem.
It works fine.
I have not found that well it was corect on native mode and when i switch it off it was on a other Adapter.
It works fine.
I have not found that well it was corect on native mode and when i switch it off it was on a other Adapter.
- ACalcutt
- Vistumbler / TechIdiots Admin
- Posts: 1302
- Joined: Sun Oct 21, 2007 6:50 pm
- Location: Rutland, MA
- Contact:
Re: No Cannel with intel ultimate n wifi link 6300
Good to hear you got it working
Re: No Cannel with intel ultimate n wifi link 6300
Hey ACalcutt, luckily I found a solution before coming here but it is weird at least that I found when going into native and back my wireless card wasn't selected by default. The program somehow forgot it was the interface in use and selected my bluetooth instead (haven't seen the code so my somehow assumed changing between was a form change and not a db change).
Just thought I'd pass that thought
Just thought I'd pass that thought
- ACalcutt
- Vistumbler / TechIdiots Admin
- Posts: 1302
- Joined: Sun Oct 21, 2007 6:50 pm
- Location: Rutland, MA
- Contact:
Re: No Cannel with intel ultimate n wifi link 6300
@techman05
Changing from native wifi mode to netsh mode makes the program work a little different internally, which changes what I use to remember the default adapter. As long as you stay in one mode or the other it will remember your adapter, but if you switch modes you will usually have to set your default again.
Changing from native wifi mode to netsh mode makes the program work a little different internally, which changes what I use to remember the default adapter. As long as you stay in one mode or the other it will remember your adapter, but if you switch modes you will usually have to set your default again.