Question regarding KML

reef · Post by **reef** » Tue Feb 19, 2008 5:26 pm

First i would like to say i love this program.

So to my problem. I use the swedish file so the out put to KML also include some swedish. The problem is i always get X in google earth even i get about 30-40% "none" crypted and iam guessing the problem is the language.

So is there anything i can do to fix that or is there a problem in my settings?? or is there somethingelse??

I hope you understand my question

I include the first row so you can se the names in swedish..

<Placemark>
<name></name>
<description><![CDATA[SSID: NMT BSSID: 00:E0:FC:CE:FD:10 Network Type: Radio Type: Channel: 11 Authentication: Encryption: Ingen Basic Rates: Other Rates: First Seen: 02-19-2008 17:34:17 248 Last Seen: 02-19-2008 17:34:51 231 Latitude: N 63.6621467 Longitude: E 20.1472200 Manufacturer: Unknown Signal History: 15-15-16-20-20-15-13-13-13-13-13-13-13-13-13-16-16-15-21-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20-20 ]]></description> <styleUrl>#secureStyle</styleUrl>
<Point>
<coordinates>20.1472200,63.6621467,0</coordinates>
</Point>
</Placemark>

Ingen=none

Post by **ACalcutt** » Tue Feb 19, 2008 6:40 pm

My guess is that there are some problems in the Netsh search words in the swedish language file.

I say this because the following fields have no data

Network Type
Radio Type
Authentication
Basic Transfer Rates
Other Transfer Rates

To create a green check icon instead of a red x icon my program checks to see if Encryption = None and that Authentication = Open. For your Language It would need to be Encryption = Ingen and Authentication = Öppen (at least according to the language file created by Exige).

If you could do the following command at the command prompt "netsh wlan show networks mode=bssid > C:\netsh.txt" and post C:\netsh.txt on the forum i can look to see what the problem is.

reef · Post by **reef** » Thu Feb 21, 2008 3:41 am

Here is how i looks like

Gr„nssnittsnamn : Tr†dl”s n„tverksanslutning
F”r n„rvarande „r 4 n„tverk synliga.

SSID 1 :
N„tverkstyp : Infrastruktur
Autentisering : WPA2-Personal
Kryptering : CCMP
BSSID 1 : 00:1d:a1:91:5d:50
Signal : 61 %
Radiotyp : 802.11g
Kanal : 11
Standardhastigheter (Mbit/s) : 1 2 5.5 11
Andra hastigheter (Mbit/s) : 6 9 12 18 24 36 48 54

I just had a quike look but i looks like a spelling error or?? (autentisering in file autenticering)

„=Ä
†=Å
”=Ö

Post by **ACalcutt** » Thu Feb 21, 2008 6:23 pm

If you could post the actual file instead of a copy it would be more helpful to me. But from what i see that is your problem. The searchwords in the swedish file do not match what you are seeing from netsh. If those do not match my program will not be able to get the data.

But, If you would like to try to fix it do this

1.) Open "C:\Program Files\Vistumbler\Languages\Swedish.ini"
2.) Look for the section marked [SearchWords]. This should be The Second section
3.) Change any word in this section that does not match the netsh.txt file from above. I would copy and paste directly out of the file because sometimes the special character have problems when typed in.
4.) Save as "Swedish 2.ini" Since I am not sure if there ar regional differences in your language
5.) Load vistumbler and load your new language file
6.) Post if you want to share

reef · Post by **reef** » Fri Feb 22, 2008 4:55 pm

Hello and thanks for trying i got one step further but still no green ones

So i will post some clips and hope you find something in them...

my latest file:
<Placemark>
<name></name>
<description><![CDATA[SSID: BSSID: 00:0B:6B:34:79:D6 Network Type: Infrastruktur Radio Type: 802.11g Channel: 1 Authentication: WPA2-Enterprise Encryption: CCMP Basic Rates: 1 2 5.5 11 Other Rates: 6 9 12 18 24 36 48 54 First Seen: 02-22-2008 17:29:01 245 Last Seen: 02-22-2008 17:29:18 232 Latitude: N 63.6610217 Longitude: E 20.1468183 Manufacturer: Unknown Signal History: 26-26-26-26-26-26-26-26-26-26-26-26-26-26-26-26-26-26 ]]></description> <styleUrl>#secureStyle</styleUrl>
<Point>
<coordinates>20.1468183,63.6610217,0</coordinates>
</Point>
</Placemark>
<Placemark>
<name></name>
<description><![CDATA[SSID: NMT BSSID: 00:E0:FC:CE:FD:10 Network Type: Infrastruktur Radio Type: 802.11g Channel: 11 Authentication: ™ppen Encryption: Ingen Basic Rates: 1 2 5.5 11 Other Rates: 6 9 12 18 24 36 48 54 First Seen: 02-22-2008 17:28:39 238 Last Seen: 02-22-2008 17:28:59 236 Latitude: N 63.6617867 Longitude: E 20.1470633 Manufacturer: Unknown Signal History: 18-18-13-18-11-20-16-16-16-16-16-16-18-99-99 ]]></description> <styleUrl>#secureStyle</styleUrl>
<Point>
<coordinates>20.1470633,63.6617867,0</coordinates>
</Point>
</Placemark>

my changes in language file..
[SearchWords]
SSID=SSID
BSSID=BSSID
NetworkType=N„tverkstyp
Authentication=Autentisering
Encryption=Kryptering
Signal=Signal
RadioType=Radiotyp
Channel=Kanal
BasicRates=Standardhastigheter
OtherRates=Andra hastigheter
Open=Ingen
None=Öppen

And finaly the netsh file:

Gr„nssnittsnamn : Tr†dl”s n„tverksanslutning
F”r n„rvarande „r 1 n„tverk synliga.

SSID 1 : dlink
N„tverkstyp : Infrastruktur
Autentisering : WPA2-Personal
Kryptering : CCMP
BSSID 1 : 00:1b:11:e7:62:a9
Signal : 80 %
Radiotyp : 802.11g
Kanal : 7
Standardhastigheter (Mbit/s) : 1 2 5.5 11
Andra hastigheter (Mbit/s) : 6 9 12 18 24 36 48 54

Post by **ACalcutt** » Fri Feb 22, 2008 7:26 pm

Looks like your "None" searchword is wrong.

None=Öppen
when it should be
None=™ppen

according to your kml file

reef · Post by **reef** » Mon Feb 25, 2008 5:18 pm

Nope still no luck for me in getting those greens ones..

I did some changes to night and will have a new drive tommorow and after that i will post my files here.
What files do you need?
.txt
.kml

settins file?
netsh file?

anything else?

Still love this prog but with the green ones working it will be perfect...

Best regards

Reef

Post by **ACalcutt** » Mon Feb 25, 2008 9:44 pm

I need the netsh.txt from the command "netsh wlan show networks mode=bssid > C:\netsh.txt". Do this command when there is a completly open network in range (Encryption=Ingen, Authentication = ™ppen)

I will use the settings file you posted in the language file section

reef · Post by **reef** » Tue Feb 26, 2008 4:13 pm

Ok lets se here is the files that i have made this afternoon.
Had some truble getting gps so i went outside for a walk with the computer iam lucky i didnt meet anyone...

Many many thanks for trying too help me..

Post by **ACalcutt** » Tue Feb 26, 2008 7:45 pm

The problem was actually very simple... Open and None search words where backwards.

reef · Post by **reef** » Sat Mar 01, 2008 9:41 am

Yes and its working great

Many thanks!!

TechIdiots Forum

Question regarding KML

Question regarding KML

Re: Question regarding KML

Re: Question regarding KML

Re: Question regarding KML

Re: Question regarding KML

Re: Question regarding KML