Update splash/ Old DB Splash

Post Reply
mysticvirgo67
Mad Poster / Moderator / Promoter
Mad Poster / Moderator / Promoter
Posts: 424
Joined: Sun Jun 28, 2009 4:52 pm

Update splash/ Old DB Splash

Post by mysticvirgo67 »

Ummm.. the "new version available" splash is a little annoying... could it be rigged with the options "Never update / remind later / update now" buttons?
Likewise with old DB detected splash? Give the options to diable the splash just "yes/no"

--Mystic
"People don't need restore. They just need recovery...and the occasional hard boot"
"The maximum acceleration of a PC is limited only by the amount of explosives used"
User avatar
ACalcutt
Vistumbler / TechIdiots Admin
Vistumbler / TechIdiots Admin
Posts: 1302
Joined: Sun Oct 21, 2007 6:50 pm
Location: Rutland, MA
Contact:

Re: Update splash/ Old DB Splash

Post by ACalcutt »

To disable the update prompt
Settings --> Vistumbler Settings -> Uncheck "Automatically Check For Updates"

Remind later would basically be answering no to the current prompt, update now would be yes. With automatically update turned off you can still do a manual update (Help --> Check for updates)

I can probably add in some MDB recovery options, like "never recover", but right now they do not exist
mysticvirgo67
Mad Poster / Moderator / Promoter
Mad Poster / Moderator / Promoter
Posts: 424
Joined: Sun Jun 28, 2009 4:52 pm

Re: Update splash/ Old DB Splash

Post by mysticvirgo67 »

okay.. thank you You may resume bickering with Perf now <snicker>
"People don't need restore. They just need recovery...and the occasional hard boot"
"The maximum acceleration of a PC is limited only by the amount of explosives used"
Post Reply