Page 1 of 1
No gps coordinates showing up?
Posted: Thu Oct 15, 2015 4:03 am
by NShoe
Hello all, I'm new to vistumbler and am using a globalsat bu353-s4 gps receiver. I installed the drivers, configured the gps settings and even tested the receiver's accuracy with gpsinfo and it worked fine, so why am I not seeing any gps coordinates in vistumbler, what do I have to do?
No gps coordinates showing up?
Posted: Thu Oct 15, 2015 6:04 am
by pferland
Does the Driver make a Comm port for Vistumbler to connect to?
To check that, you can look in the Device Manager and it should show up under Ports (COM & LPT)
Something like this:
http://www.laptopgpsworld.com/attachmen ... anager.jpg
If it does not make a com port, you will need to use a 3rd party program to create one.
Andrew has used GPS Gate Splitter before:
http://gpsgate.com/products/gpsgate_client
Let me know if that worked out for you.
-Phil
