Installation and operation

Having a problem? Ask for help here.
Post Reply
Gerryc49
Newbie
Posts: 1
Joined: Sat Jan 31, 2015 10:40 am

Installation and operation

Post by Gerryc49 »

OK, not really a novice but certainly not a newbie. I downloaded the product, installed and started. That's it! no results to the initial or any other scans. My expectation was I'd install it and start it and wallah results, no?

Thanks, Gerryc
User avatar
ACalcutt
Vistumbler / TechIdiots Admin
Vistumbler / TechIdiots Admin
Posts: 1302
Joined: Sun Oct 21, 2007 6:50 pm
Location: Rutland, MA
Contact:

Installation and operation

Post by ACalcutt »

Basically once you have vistumbler running you just need to make sure you wireless card is selected in the interface menu, then hit the scan button.
mhilton2
Newbie
Posts: 1
Joined: Tue Apr 07, 2015 11:35 am

Installation and operation

Post by mhilton2 »

I'm having same problem, No wireless cards show up in interface, what now?
User avatar
pferland
Contributor
Contributor
Posts: 406
Joined: Mon Oct 22, 2007 8:38 am
Location: The Universe
Contact:

Installation and operation

Post by pferland »

What OS are you using? Is it a virtual machine?
What happens when you run the following command in a command prompt.

Code: Select all

netsh show interface
The best acceleration you can get on a Mac is 9.8ms^2
Post Reply