Missing Information "Mac Adress or Secure Information"

Post Reply
Forscher187
Junior Member
Posts: 5
Joined: Mon Dec 27, 2010 3:50 am

Missing Information "Mac Adress or Secure Information"

Post by Forscher187 »

Hello,

i have Made a Update to the latest Version, the Older Version i don´t know what i have used but in the Old Version i have see the mac adress and how the AP´s is Secure.

With the latest Version i have the Problem that i see the mac if i don´t use the native mode but then i don´t see how the AP´s is secure. If i switch to Native mode i see the Secure Mode "WEP, WPA..." but not the Mac Adress.
User avatar
ACalcutt
Vistumbler / TechIdiots Admin
Vistumbler / TechIdiots Admin
Posts: 1302
Joined: Sun Oct 21, 2007 6:50 pm
Location: Rutland, MA
Contact:

Re: Missing Information "Mac Adress or Secure Information"

Post by ACalcutt »

native mode has different information. it does not have mac address, channel, and displays the network types a little differently.

using netsh mode is the recommended way to run vistumbler. native mode is kind of limited. native wifi is mainly included for backend stuff, testing, and a little bit of xp support.
Forscher187
Junior Member
Posts: 5
Joined: Mon Dec 27, 2010 3:50 am

Re: Missing Information "Mac Adress or Secure Information"

Post by Forscher187 »

i use Windows 7 (32), the problem is it works a time after the Update to the lates version it has changed. If i use the netsh mode the is the Network Secure Type missing. If i using the Native mode then it´s show the information of the Network.

i will try later the older version again to see if there stay´s the Information.
User avatar
pferland
Contributor
Contributor
Posts: 406
Joined: Mon Oct 22, 2007 8:38 am
Location: The Universe
Contact:

Re: Missing Information "Mac Adress or Secure Information"

Post by pferland »

Are you using a German Language version of Windows? If so your language pack file might have changed with the update.
The best acceleration you can get on a Mac is 9.8ms^2
Forscher187
Junior Member
Posts: 5
Joined: Mon Dec 27, 2010 3:50 am

Re: Missing Information "Mac Adress or Secure Information"

Post by Forscher187 »

i use the English Version.
User avatar
ACalcutt
Vistumbler / TechIdiots Admin
Vistumbler / TechIdiots Admin
Posts: 1302
Joined: Sun Oct 21, 2007 6:50 pm
Location: Rutland, MA
Contact:

Re: Missing Information "Mac Adress or Secure Information"

Post by ACalcutt »

can you go to command prompt and run this command "netsh wlan show networks mode=bssid" (without the quotes). Do this an an area you know there is some wifi and post the results. I will see if theres any reason you should be missing some data.
User avatar
ACalcutt
Vistumbler / TechIdiots Admin
Vistumbler / TechIdiots Admin
Posts: 1302
Joined: Sun Oct 21, 2007 6:50 pm
Location: Rutland, MA
Contact:

Re: Missing Information "Mac Adress or Secure Information"

Post by ACalcutt »

If you are using an english version of windows make sure your searchworks look like this (Settings --> Set netsh searchwords)
searchwords.png
searchwords.png (67.41 KiB) Viewed 11571 times
the field name that you are missing should have a matching searchword. this needs to match what you see it your netsh output.. For english (en_US), it should be what I have above
C:\Users\Andrew>netsh wlan show networks mode=bssid

Interface name : Wireless Network Connection
There are 1 networks currently visible.

SSID 1 : EIHOME
Network type : Infrastructure
Authentication : WPA2-Personal
Encryption : CCMP
BSSID 1 : 00:25:9c:6a:51:3f
Signal : 94%
Radio type : 802.11g
Channel : 6
Basic rates (Mbps) : 1 2 5.5 11
Other rates (Mbps) : 6 9 12 18 24 36 48 54
Post Reply